LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2002 >> Jimmy 2D Utility, Part Time, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1660 (Lighting Systems) >> Repair Instructions >> Headlamp Bulb Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
  • Replace a high beam bulb with another high beam bulb. The high beam bulb has a black socket.
  • Replace a low beam bulb with another low beam bulb. The low beam bulb has a gray tip and a grey socket.
  1. Position the bulb and socket to the headlamp.
  2. Connect the electrical connector to the socket.
  3. Install the bulb and socket to the housing by rotating the bulb and socket clockwise, locking the retaining tabs to the housing.
    Fig 1: Headlamp Socket And Bulb
    GM729431Courtesy of GENERAL MOTORS CORP.
  4. Install the access cover to the rear of the headlamp assembly
  5. Install the headlamp. Refer to Headlamp Replacement (TrailBlazer)  orHeadlamp Replacement (Bravada)  or Headlamp Replacement (Envoy, Envoy XUV) .
scientia non olet · About LEMON Manuals