Removal Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Locating Generator Battery Components

Courtesy of GENERAL MOTORS CORP.

Disconnect the generator battery. Refer to Hybrid Battery Service Disconnect/Connect .
Remove the 2 generator battery fan bolts (2).
Remove the 12 generator battery cover bolts (1).
Remove the generator battery wiring harness from the clip (3) on the generator battery cover.

Fig 2: View Of Generator Battery Cover

Courtesy of GENERAL MOTORS CORP.

Remove the generator battery cover.

Fig 3: Battery Temperature Sensors

Courtesy of GENERAL MOTORS CORP.

IMPORTANT: Disconnecting the generator battery temperature sensor wiring harness electrical connectors will disable the 36 volts within the generator battery.

Disconnect the generator battery temperature sensor wiring harness electrical connectors from the battery temperature sensors in the following order:
- 3
- 2
- 1

Fig 4: Generator Battery Terminal Covers

Courtesy of GENERAL MOTORS CORP.

Remove the generator battery terminal covers.

Fig 5: Generator Battery Cable Nuts

Courtesy of GENERAL MOTORS CORP.

Remove the generator battery cable nuts (1-4) from the batteries.

Fig 6: Generator Battery Cable Leads

Courtesy of GENERAL MOTORS CORP.

Remove and reposition the generator battery cable leads (1-4) from the battery terminals.
Remove the generator battery temperature sensor wiring harness terminals from the battery terminals.
Cut the tie straps securing the battery cables to the generator battery temperature sensor wiring harness.

Fig 7: Identifying Generator Battery Temperature Sensor Wiring Harness Electrical Connectors

Courtesy of GENERAL MOTORS CORP.

Disconnect the generator battery temperature sensor wiring harness electrical connectors (2, 5) from the generator control module.
Remove the generator battery temperature sensor wiring harness.