Throttle Actuator Control Module (5.3L): Removal
WARNING: This page is about a different car, the 2003 Oldsmobile Bravada, 2003 GMC Envoy XL, 2003 GMC Envoy, and 2003 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the bulk connector from the bracket, insert a small flat-bladed tool to disengage the clip.
- Disconnect the Instrument Panel (I/P) harness electrical connector. See Figure.
- Disconnect the engine harness electrical connector. See Figure.
- Release the retaining tab on the side of the Throttle Actuator Control (TAC) module (3). See Figure.
- Remove the TAC module (3) from the retaining bracket (1).
- If necessary, remove the TAC module bracket nuts (2) and bracket (1).