Low Pressure Sensor / Switch: Service and Repair

AIR CONDITIONING (A/C) LOW PRESSURE SWITCH REPLACEMENT

TOOLS REQUIRED
J 39400-A Halogen Leak Detector







REMOVAL PROCEDURE
1. Disconnect the A/C low pressure switch electrical connector.
2. Remove the A/C low pressure switch (5) from the accumulator.








INSTALLATION PROCEDURE
1. Install the A/C low pressure switch (5) to the accumulator.

NOTE: Refer to Fastener Notice in Service Precautions. Vehicle Damage Warnings

Tighten
Tighten the A/C low pressure switch to................5 N.m (44 lb in).

2. Connect the A/C low pressure switch electrical connector.
3. Leak test the fittings of the component using the J 39400-A.