LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2003 >> Jimmy 2D Utility, Part Time, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission Servicing >> Adjustments >> Park/Neutral Position Switch
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Park/Neutral Position Switch

NOTE: The following procedure is for vehicles that have not had the switch removed or replaced. If the switch has been removed or replaced, see PARK/NEUTRAL POSITION SWITCH  under REMOVAL & INSTALLATION. Apply the parking brake. The engine must start in the Park or Neutral positions only. Check the switch for proper operation. If adjustment is required, proceed as follows:
  1. The transmission must be in the Neutral position only.
  2. With an assistant in driver's seat, raise and support vehicle.
  3. Loosen the switch retaining bolts and rotate the switch slightly, while the assistant attempts to start engine.
  4. After engine starts, turn engine off.
  5. Tighten PNP switch bolts to specification. See TORQUE SPECIFICATIONS .
  6. Lower the vehicle.
  7. Ensure vehicle does not start in any range other than Park and Neutral.
  8. Replace the PNP switch if proper operation can not be achieved.
scientia non olet · About LEMON Manuals