Removal & Installation
WARNING: This page is about a different car, the 2001 GMC Safari and 2001 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Use correct fastener in correct location. Replacement fasteners must be correct part number for application. Fasteners requiring replacement or fasteners requiring use of thread locking compound or sealant are identified in service procedures. DO NOT use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage fastener. Use correct tightening sequence and specifications when installing fasteners in order to avoid damage to part and systems.
Remove dome light lens from overhead console. Remove overhead console retaining screws. Disconnect dome light connector. Carefully swing overhead console downward. Pull overhead console forward to clear rear mounting tabs. Remove display lens from overhead. Disconnect connectors and remove temperature/compass display module. To install, reverse removal procedure.