Scan Tool Data Definitions
- Battery Voltage
-
Displays current battery voltage at the memory seat module.
- Current Power Mode
-
Displays the current power mode in OFF or RUN.
- Driver 1, 2, 3 & 4 Memory Assignments
-
Display value will be in the current setting for each memory assignment.
- Engine Running
-
Displays current engine state in YES or NO.
- Front Vertical Motor
-
Display value will be Up/Inactive/Down. Displays the current memory seat module command to the front vertical motor.
- Front Vertical Position Switch
-
Display value will be Up/Inactive/Down. Displays the current position of the seat switch.
- Front Vertical Sensor
-
Display value will be in volts. Current feedback to the memory seat module from the front vertical position sensor.
- Horizontal Motor
-
Display value will be Forward/Inactive/Back. Displays the current memory seat module command to the lateral motor.
- Horizontal Position Switch
-
Display value will be Forward/Inactive/Back. Displays the current position of the seat switch.
- Horizontal Sensor
-
Display value will be in volts. Current feedback to the memory seat module from the horizontal position sensor.
- Last Driver
-
Displays the last driver of the vehicle for personalization.
- Last Key Pressed on Fob
-
Displays the last key pressed to enter or exit the vehicle in Lock/Unknown/Unlock.
- Mem 1 & 2 Front Vertical Value
-
Display value will be in volts. Displays the current setting for memory positioning of the front vertical motor that is in memory seat module.
- Mem 1 & 2 Horizontal Value
-
Display value will be in volts. Displays the current setting for memory positioning of the lateral motor that is in memory seat module.
- Mem 1 & 2 Rear Vertical Value
-
Display value will be in volts. Displays the current setting for memory positioning of the rear vertical motor that is in memory seat module.
- Mem 1 & 2 Recline Value
-
Display value will be in pulses. Displays the current setting for memory positioning of the recliner motor that is in memory seat module.
- Memory 1 & 2 Select Switch
-
Display value will be Inactive/Active. Displays the current state of the memory select switches.
- Memory Set
-
Display value will be Inactive/Active. Displays the current state of the memory select switches.
- Memory Set Timer
-
Display value will be Inactive/Active. Displays if the memory set button is being held and the timer is running for the seat to be set.
- Park Brake Switch
-
Displays the current state of the parking brake in set or released.
- Personalization Timer
-
Display value will be Inactive/Active. Displays if the memory set button is being held and the timer is running for the seat to be set.
- Rear Vertical Motor
-
Display value will be Up/Inactive/Down. Displays the current memory seat module command to the rear vertical motor.
- Rear Vertical Position Switch
-
Display value will be Up/Inactive/Down. Displays the current position of the seat switch.
- Rear Vertical Sensor
-
Display value will be in volts. Current feedback to the memory seat module from the rear vertical position sensor.
- Recline Sensor
-
Display value will be in volts. Current feedback to the memory seat module from the recline position sensor.
- Recline Switch
-
Display value will be Forward/Inactive/Back. Displays the current position of the seat switch.
- Recliner Motor
-
Display value will be Forward/Inactive/Back. Displays the current memory seat module command to the recliner motor.
- Transmission
-
Displays the current type of transmission.
- Vehicle Speed
-
Displays current vehicle speed.