LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2004 >> Jimmy 2D Utility, Part Time, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Body Control System >> Repair Instructions >> Body Control Module Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

IMPORTANT: The ignition switch should be in the OFF position when connecting or disconnecting the connectors to the BCM. Always disconnect the Brown BCM connector FIRST and connect the Brown BCM connector LAST. The BCM can set DTC(s) with the ignition switch in the OFF position.
  1. Remove the left instrument panel sound insulator from the vehicle. Refer to Closeout/Insulator Panel Replacement - Left in Instrument Panel, Gages and Console.
  2. Remove the lower instrument panel sound insulator from the vehicle. Refer to Closeout/Insulator Panel Replacement - Instrument Panel (I/P) Lower in Instrument Panel, Gages and Console.
  3. Disconnect the electrical connectors from the body control module.
    4. Fig 1: View Of Body Control Module
    GM239852Courtesy of GENERAL MOTORS CORP.
  4. Bend the 2 snap retainers back slightly and pull the body control module from the bracket at an angle.
scientia non olet · About LEMON Manuals