LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2004 >> Jimmy 2D Utility, Part Time, Standard >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Generator Bracket Replacement (4.3L) >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure .
  2. Remove the engine cooling fan. Refer to Fan Clutch Replacement in Engine Cooling.
  3. Remove the drive belt. Refer to Drive Belt Replacement in Engine Mechanical - 4.3L.
  4. Remove the generator. Refer to Generator Replacement (4.3L) .
    5. Fig 1: Locating Engine Wiring Harness Bracket
    GM340790Courtesy of GENERAL MOTORS CORP.
  5. Remove the engine wiring harness bracket from the generator mounting bracket.
  6. Remove the drive belt tensioner. Refer to Drive Belt Tensioner Replacement in Engine Mechanical - 4.3L.
  7. Remove the drive belt idler pulley. Refer to Drive Belt Idler Pulley Replacement - Right in Engine Mechanical - 4.3L.
    8. Fig 2: View Of Generator Mounting Bracket
    GM196643Courtesy of GENERAL MOTORS CORP.
  8. Remove the 3 bolts and nut holding the generator mounting bracket to the engine.
  9. Remove the generator mounting bracket.
scientia non olet · About LEMON Manuals