LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2006 >> Yukon Denali >> Repair and Diagnosis >> Accessories & Equipment >> Collision/Avoidance >> Object Detection System >> Repair Instructions >> Information Center Telltale Assembly Replacement (Utility) >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

    Fig 1: Removing Information Center Telltale Assembly Retaining Screws (Utility)
    GM762783Courtesy of GENERAL MOTORS CORP.
  1. Install the information center telltale assembly to the garnish molding.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the retaining screws (1).

    Tighten:  Tighten the retaining screws to 2 N.m (18 lb in).

  3. Install the rear quarter garnish molding. Refer to Garnish Molding Replacement - Rear Corner in Interior Trim.
scientia non olet · About LEMON Manuals