LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2007 >> Acadia SLE, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 523 (Anti-Lock Brake System, Traction Control System & Stability Control System) >> Repair Instructions >> Brake Pressure Modulator Valve Bracket Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2007 Pontiac G6. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Brake Pressure Modulator Valve (BPMV) Bracket & Nuts
    GM1234790Courtesy of GENERAL MOTORS CORP.
  1. Install the bracket to the vehicle.
  2. Install the 3 brake pressure modulator valve (BPMV) bracket nuts.
    NOTE: Refer to Fastener Notice .

    Tighten:  Tighten the nuts to 10 N.m (89 lb in).

    3. Fig 2: View Brake Pressure Modulator Valve (BPMV) Bracket Components
    GM1235535Courtesy of GENERAL MOTORS CORP.
  3. Install the 4 BPMV bolts.

    Tighten:  Tighten the bolts to 10 N.m (89 lb in).

  4. Install the left front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
  5. Lower the vehicle.
scientia non olet · About LEMON Manuals