Memory Seat Control Module Replacement

WARNING: This page is about a different car, the 2008 Saturn Outlook, 2008 GMC Acadia, and 2008 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Locating Memory Seat Control Module

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the front seat. Refer to Bucket Seat Replacement .
1	Driver Seat Adjuster Memory Module Screw (Qty: 4) NOTE: Refer to Fastener Notice . Tighten: 2 N.m (18 lb in)
2	Driver Seat Adjuster Memory Module Procedure Disconnect the electrical connector. Reprogram the module after replacement. Refer to Control Module References .

Callout

Component Name

Preliminary Procedure:
Remove the front seat. Refer to Bucket Seat Replacement .

Driver Seat Adjuster Memory Module Screw (Qty: 4)

NOTE: Refer to Fastener Notice .

Tighten: 2 N.m (18 lb in)

Driver Seat Adjuster Memory Module

Procedure

Disconnect the electrical connector.
Reprogram the module after replacement. Refer to Control Module References .