Installation Procedure
WARNING: This page is about a different car, the 2005 Pontiac G6. However, it is still accessible from the selected car via links, so may be relevant.
- Install the windshield into the opening. Refer to Urethane Adhesive Installation of Stationary Windows (Windshield) or Urethane Adhesive Installation of Stationary Windows (Rear Window) .
- Install the rearview mirror. Refer to Rearview Mirror Replacement .
- Install the interior windshield pillar garnish moldings. Refer to Garnish Molding Replacement - Windshield Pillar in Interior Trim.
- Install the air inlet grille. Refer to Air Inlet Grille Panel Replacement in Body Front End.
- Install the windshield wipers arms and blades. Refer to Wiper Arm Replacement (Legacy) in Wipers/Washer Systems.
- Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
- Close the hood.