Body Control Module Replacement

WARNING: This page is about a different car, the 2013 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Body Control Module

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the instrument panel (I/P) insulator. Refer to Instrument Panel Insulator Replacement - Left Side (Right Hand Drive) , Instrument Panel Insulator Replacement - Left Side (Left Hand Drive) . Remove the driver knee bolster bracket. Refer to Driver Knee Bolster Bracket Replacement (Right Hand Drive) , Driver Knee Bolster Bracket Replacement (Left Hand Drive) .
1	Body Control Module (BCM) Procedure Disconnect the electrical connectors. Refer to Control Module References for programming and set-up information.

Callout

Component Name

Preliminary Procedures

Remove the instrument panel (I/P) insulator. Refer to Instrument Panel Insulator Replacement - Left Side (Right Hand Drive) , Instrument Panel Insulator Replacement - Left Side (Left Hand Drive) .
Remove the driver knee bolster bracket. Refer to Driver Knee Bolster Bracket Replacement (Right Hand Drive) , Driver Knee Bolster Bracket Replacement (Left Hand Drive) .

Body Control Module (BCM)

Procedure

Disconnect the electrical connectors.
Refer to Control Module References for programming and set-up information.