LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2007 >> Acadia SLT, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Adjustable Pedal System) >> Repair Instructions >> Adjustable Pedal Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2005 Pontiac G6. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Installing Adjustable Pedal Module Into Side Of I/P Support Beam
    GM1469984Courtesy of GENERAL MOTORS CORP.
  1. Remove the old 2-sided tape from the I/P support beam.
  2. If reinstalling the same adjustable pedal module, install NEW 2-sided tape to the module.
  3. Connect the electrical connector to the adjustable pedal module.
  4. Install the adjustable pedal module (1) to the side of the I/P support beam.
  5. Install a NEW tie strap to secure the adjustable pedal module to the I/P support beam.
  6. Install the closeout panel. Refer to Closeout/Insulator Panel Replacement - Left in Instrument Panel, Gages, and Console.
scientia non olet · About LEMON Manuals