Set Up a Theft Deterrent Module (TDM) Using New Keys
WARNING: This page is about a different car, the 2007 Pontiac G6. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Use this procedure only if replacing the TDM using new vehicle keys.
- Connect a scan tool to the vehicle.
- Turn ON the ignition, with the engine OFF.
- With a scan tool, select TDM in the Vehicle Control Systems Module Replacement/Setup data list.
- Select Step 1.
- Select Use New Keys.
- Follow the scan tool on-screen instructions.
Programming Immobilizer System Components
After the TDM has been set up using one of the above procedure, the ECM and TDM must learn the new fuel continue password. To learn the new password, perform the Programming Immobilizer System Components (Canada) procedure.