Keyless Entry Transmitter Battery: Service and Repair

Transmitter Battery Replacement

Removal Procedure

Under normal use, the battery in the transmitter will last about 2 years. For battery replacement, use a Panasonic(R) 3 volt, type CR2032, or equivalent.




1. Open the transmitter case and perform the following steps:

1. Insert a dime between the 2 halves of the transmitter near the key ring hole.
2. Twist the dime.




2. Remove the battery.

Installation Procedure




1. Install the battery with the (+) positive side down.
2. Close the transmitter case and perform the following steps:

1. Align the top and bottom covers.
2. Press together the top and the bottom covers.
3. Inspect the operation of the transmitter.