Body Control Module: Service and Repair

BODY CONTROL MODULE REPLACEMENT

REMOVAL PROCEDURE

1. CAUTION: Refer to Battery Disconnect Caution.

Disconnect the negative battery cables.




2. Remove the knee bolster.




3. Disconnect the brown connector.
4. Disconnect all other connectors (1).
5. Remove the body control module (BCM) from the sliding bracket.

INSTALLATION PROCEDURE




1. Slide the BCM onto the bracket.
2. Connect all the connectors (1) except the brown connector.
3. Connect the brown connector.




4. Install the knee bolster.
5. Connect the negative battery cables.
6. Reprogram the BCM. Refer to Body Control Module Programming and Setup.
7. Perform the Passlock Learn Procedure. Refer to Programming Theft Deterrent System Components.
8. Refer to Control Module References for programming and setup information. Programming and Relearning