Door Lock Control Module Scan Tool Information (Driver Door Lock/Window Switch)
WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
Driver Door Switch Scan Tool Data Parameters
| Parameter | System State | Expected Value | Definition |
|---|---|---|---|
| Operating Conditions: Ignition ON | |||
| Battery Voltage Signal | - | Varies | This displays volts. This is the voltage input supplied to the driver door switch. |
| Door Key Cyl. Unlock Switch | - | Idle | The scan tool displays Idle or Unlock. This is the state of the driver door key cylinder unlock switch. |
| Door Lock Actuator Cmd. | - | Off | The scan tool displays Off, Unlock or Lock. This is the state of the door lock actuator. |
| Driver Door Ajar Sw. | - | Inactive | The scan tool displays Active or Inactive. This is the state of the driver door ajar switch. |
| Driver Door Open Sw. | - | Inactive | The scan tool displays Active or Inactive. This is the state of the driver door open switch. |
| Driver LF Window Switch | - | Off | The scan tool displays Off, Up, Down, Express Up or Express Down. This is the state of the driver left front window switch. |
| Driver LR Window Switch | - | Off | The scan tool displays Off, Up, Down, Express Up or Express Down. This is the state of the driver left rear window switch. |
| Driver RF Window Switch | - | Off | The scan tool displays Off, Up, Down, Express Up or Express Down. This is the state of the driver right front window switch. |
| Driver RR Window Switch | - | Off | The scan tool displays Off, Up, Down, Express Up or Express Down. This is the state of the driver right rear window switch. |
| Memory Recall Switches | - | Varies | This displays volts. This is the voltage input supplied to the driver door memory recall switches. |
| Memory Switch 12V Ref. | - | Varies | This displays volts. This is the voltage input supplied to the driver door memory switch. |
| Memory Switch Backlight | - | Varies | The scan tool displays %. This is the intensity of the backlighting in the memory switch. |
| Mirror 5 Volt Reference | - | ON | The scan tool displays On or Off. This is the state of the voltage reference circuit to the mirror. |
| Mirror Fold Switch | - | Idle | The scan tool displays Idle, Extend or Retract. This is the state of the mirror fold switch. |
| Mirror Motor | - | Idle | The scan tool displays Idle, Invalid, Up, Down, Left and Right. This is the state of the mirror motor. |
| Mirror Horizontal Position | - | Varies | This displays volts. This is the voltage input supplied to the mirror horizontal position. |
| Mirror Select Switch | - | Idle | The scan tool displays Idle, Right or Left. This is the state of the mirror select switch. |
| Mirror Vertical Position | - | Varies | This displays volts. This is the voltage input supplied to the mirror vertical position. |
| Rear Window Sw. 12V Ref. | - | Varies | This displays volts. This is the voltage input supplied to the rear window switch. |
| Seat Back Heat Mode Ind. Cmd. | - | Off | The scan tool displays On or Off. This is the state of the seat back heat mode indicator. |
| Seat Back Heat Mode Sw. | - | Inactive | The scan tool displays Active or Inactive. This is the state of the seat back heat mode switch. |
| Seat Cool Mode Ind. Cmd. | - | Off | The scan tool displays On or Off. This is the state of the seat cool mode indicator. |
| Seat Cool Mode Switch | - | Off | The scan tool displays On or Off. This is the state of the seat cool mode switch. |
| Seat Heat High Ind. Cmd. | - | Off | The scan tool displays On or Off. This is the state of the seat heat high indicator. |
| Seat Heat Medium Ind. Cmd. | - | Off | The scan tool displays On or Off. This is the state of the seat heat medium indicator. |
| Seat Heat Low Ind. Cmd. | - | Off | The scan tool displays On or Off. This is the state of the seat heat low indicator. |
| Seat Heat Mode Cmd. | - | Off | The scan tool displays On or Off. This is the state of the seat heat mode. |
| Seat Heat Mode Sw. | - | Inactive | The scan tool displays Active or Inactive. This is the state of the seat heat mode switch. |
| VIN Learned | - | Yes | The scan tool displays Yes or No. This is the state of the driver door switch VIN programming. |
| Window Lockout Switch | - | Off | The scan tool displays On or Off. This is the state of the driver door window lockout switch. |
| Window Lockout Switch Indicator Command | - | Off | The scan tool displays On or Off. This is the state of the driver door window lockout switch indicator. |
| Window Switch Backlight | - | Varies | The scan tool displays %. This is the intensity of the backlighting in the window switch. |
Driver Door Switch Scan Tool Output Controls
| Scan Tool Output Control | Description |
|---|---|
| Door Deadbolt Lock/Unlock | This command will lock and unlock the driver door dead bolt actuator. |
| Door Lock/Unlock | This command will lock and unlock the driver door lock actuator. |
| Front Window Motor | This test will command the front window both up and down. |
| Heated Seat Indicators | This will command the heated seat indicators ON and OFF. |
| Integrated Sw. Backlighting Test | The scan tool commands the % intensity of the integrated switches backlighting. |
| Mirror Fold | This will command the driver mirror to fold and unfold. |
| Mirror Heater | This will command the driver mirror heater ON and OFF. |
| Mirror Left/Right | This will command the driver mirror left and right. |
| Mirror Up/Down | This will command the driver mirror up and down. |
| Non-Integrated Sw. Backlighting Test | The scan tool commands the % intensity of the non-integrated switches backlighting. |
| Power Window Motor Programming | This will enable the driver power window motor to be programmed. |
| Puddle/Courtesy Lamp | This will command the courtesy lamps ON and OFF. |
| Window Lockout Indicator | This will command the window lockout indicator ON and OFF. |