LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2010 >> Acadia SLE, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 481 (Object Detection System And Pedestrian Protection System) >> Diagnostic Information and Procedures >> DTC B1008: Calibration Data Not Programmed >> Circuit/System Verification
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Verification

WARNING: This page is about a different car, the 2016 GMC Acadia, 2016 Chevrolet Traverse, and 2016 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE:

    Do not diagnose this DTC if set in history

  1. Ignition ON.
  2. Verify that DTC B101E 42 is not set.
    • If the DTC is not set 
  3. Verify that DTC B1008 is not set.
    • If DTC is set 
    1. Calibrate the front camera module. Refer to Front View Camera Module Calibration .
    2. Verify the DTC does not set.
      • If the DTC sets, replace the frontview camera module.
      • If the DTC does not set
    3. All OK.
    • If the DTC is not set 
  4. All OK.
scientia non olet · About LEMON Manuals