Liftgate Close Actuator Motor Control Module Scan Tool Information

WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.

Liftgate Module Scan Tool Data Parameters

Parameter	Expected Value	Description
Operating Conditions: Ignition ON
In Park Switch Status	On/Off	The scan tool displays Off or On. On is displayed if the vehicle was in Park during the last open or close history data.
Liftgate Angle	0°	The scan tool displays the calculated angle in degrees of the liftgate relative to the liftgate latch.
Liftgate Front Control Switch	Active/Inactive	The scan tool displays Active or Inactive. This is the state of the front control switch of the liftgate module.
Liftgate Handle Switch	Active/Inactive	The scan tool displays Active or Inactive. This is the state of the liftgate handle switch.
Liftgate Mode Switch	Varies	The scan tool displays the current setting of the mode switch in Counts which varies depending upon if the switch is in the Off, 3/4 or Max position and the system voltage.
Liftgate Rear Close Switch	Active/Inactive	The scan tool displays Active or Inactive. This is the state of the liftgate shutface switch.
Liftgate Latch Pawl Switch	Active/Inactive	The scan tool displays Active or Inactive. This is the state of the latch pawl switch.
Liftgate Latch Ratchet Switch	Active/Inactive	The scan tool displays Active or Inactive. This is the state of the latch ratchet switch.
Liftgate Latch Sector Switch	Active/Inactive	The scan tool displays Active or Inactive. This is the state of the latch sector switch.
Liftgate System Voltage 1	11.5-13.0 V	The scan tool displays the battery system 1 voltage input to the liftgate module.
Liftgate System Voltage 2	11.5-13.0 V	The scan tool displays the battery system 2 voltage input to the liftgate module.
Secondary Obstacle Detection Liftgate	3-3.5 V	The scan tool displays the actual voltage on the liftgate object sensors circuit as measured by the liftgate module.