LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2010 >> Canyon 4D Pickup, 2.9 9 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System & Fuel System - 2.9L - Repair Instructions >> Repair Instructions >> Fuel Tank Replacement >> Assembly Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Assembly Procedure

    Fig 1: View Of Fuel Feed And EVAP Lines
    GM1766211Courtesy of GENERAL MOTORS CORP.
  1. Install the fuel tank module to the fuel tank. Refer to Fuel Tank Module Replacement .
  2. Connect the fuel feed line (2) quick connect fitting to the module. Refer to Plastic Collar Quick Connect Fitting Service .
  3. Engage the fuel feed line to the retaining feature molded into the fuel tank.
  4. Connect the EVAP line (1) quick connect fittings to the module and the vent valve. Refer to Plastic Collar Quick Connect Fitting Service .
  5. Engage the EVAP line to the retaining features molded into the fuel tank.
  6. Install the EVAP line to the clip on the side of the fuel tank.
scientia non olet · About LEMON Manuals