Circuit/System Testing
- Ignition OFF, disconnect the X1 harness connector at the X85 Steering Wheel Air Bag Coil.
- Ignition ON, test for B+ between the ignition circuit terminal 6 male side and ground.
- If less than the specified value, test the voltage reference circuit for a short to ground or an open/high resistance. If the circuit tests normal, replace the K9 Body Control Module.
- Test for B+ between the ignition circuit terminal 6 male side and the signal circuit terminal 7 male side.
- If less than the specified value, test the signal circuit for a short to voltage or an open/high resistance. If the circuit tests normal, replace the K9 Body Control Module.
- Ignition OFF, disconnect the X3 harness connector at the K9 Body Control Module.
- Test for infinite resistance between the signal circuit terminal 7 male side at the X85 Steering Wheel Air Bag Coil and ground.
- If less than the specified value, test the signal circuit for a short to ground.
- If all circuits test normal, test or replace the S70R Steering Wheel Controls Switch - Right.