Object Alarm Module Scan Tool Information
Park Assist Module
| Scan Tool Parameter | System State | Expected Value | Definition |
|---|---|---|---|
| Operating Conditions: Ignition ON, Engine OFF, Parking Assist System ON | |||
| Battery Voltage | - | Varies | The scan tool displays the current voltage of the battery in volts. |
| Loudspeaker Feed Voltage Output | - | Varies | The scan tool displays the output feed voltage to the radio measured in counts. |
| Park Assist Disable 1-7 History | - | Varies | The scan tool displays Empty, Manual Disable, Park Brake, Hitch/Obj Attach, Reverse Ovrspeed, Inhibit, Sense Disturbance, or Sensor Ring Time. This parameter displays the status of the park assist disable history. |
| Park Assist Switch | - | Active | The scan tool displays Active or Inactive. This parameter displays the state of the parking assist switch. |
| Park Assist Switch LED | - | Off | The scan tool displays Off or ON. This parameter displays the state of the parking assist switch LED. |
| Park Assist Switch LED CKT | - | OK | The scan tool displays OK or Overcurrent. This parameter displays the state of the park assist switch led circuit. |
| Park Assist System Status | - | Enable | The scan tool displays Disable, Enable, Inhibit or Failed/Block. This parameter displays the current status of the parking assist system. |
| Power Mode | - | Accessory | The scan tool displays Off, Accessory, Run or Crank Request. This parameter displays the state of the reference voltage. |
| Vehicle Speed | - | 0 | The scan tool displays the vehicle speed in km/h (mph). |