Communication Interface Module Replacement (without RPO SLT)
Courtesy of GENERAL MOTORS COMPANY Communication Interface Module Replacement (without RPO SLT)
| Callout |
Component Name |
Preliminary Procedure
Remove the instrument panel lower center panel. Refer to Instrument Panel Lower Center Trim Replacement
. |
| 1 |
Communication Interface Module
- Push outward on the tab to release the communication interface module from the bracket.
- Disconnect the electrical connectors.
- Reprogram the communication interface module after replacement. Refer to Control Module References
.
- If replacing the communication interface module be sure to transfer Bluetooth Antenna, if equipped.
|