Fuel Injector Control Module Programming and Setup: Notes
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2017 GMC Sierra 3500 HD, 2017 GMC Sierra 2500 HD, 2017 GMC Sierra 1500, 2017 Chevrolet Silverado 3500 HD, and 2017 Chevrolet Silverado 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
The fuel injector control module (FICM) must be programmed with the proper calibration software. The module stores and utilizes this information, however if it is not properly configured with the correct calibration software, the FICM will not control all of the vehicle features properly.
Ensure that the following conditions exist in order to prepare for FICM programming:
- The battery is fully charged.
- The MDI data link connectors are secure.
- The scan tool is loaded with the most current software version.
- All disconnected modules and devices are reconnected securely.
- This entire procedure has been reviewed before proceeding.
Do not reprogram the FICM unless directed by a service procedure or a service bulletin.