LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2014 >> Acadia SLE, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 3.6L (LLT) - Repair Instructions >> Repair Instructions >> Air Cleaner Element Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Install a NEW air cleaner element (4).
    Fig 1: Identifying Air Cleaner Components
    GM1860603Courtesy of GENERAL MOTORS COMPANY
  2. Position the air cleaner housing cover (3) (with outlet duct) onto the air cleaner lower housing.
  3. Connect the windshield washer hose clip to the air cleaner housing cover.
    NOTE: Ensure the windshield washer hose is routed properly and not trapped between the upper cover and lower housing.
  4. Install the air cleaner outlet duct onto the throttle body.
  5. Tighten the 6 air cleaner housing cover screws (2).
  6. Tighten the air cleaner outlet duct clamp (1) at the throttle body.
    CAUTION: Refer to Fastener Caution .

    Tighten 

    Tighten the clamp to 4 N.m (35 lb in).

  7. Connect the engine wiring harness electrical connector to the MAF/IAT sensor.
    Fig 2: Identifying Fresh Air Tube & Related Components
    GM2065375Courtesy of GENERAL MOTORS COMPANY
  8. Connect the PCV quick disconnect (2). Refer to Plastic Collar Quick Connect Fitting Service .
  9. Install the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement .
scientia non olet · About LEMON Manuals