Body Control Module Replacement

WARNING: This page is about a different car, the 2010 GMC Terrain and 2010 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Body Control Module

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Remove the drivers side insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side (Equinox) or Instrument Panel Insulator Panel Replacement - Left Side (Terrain) Remove the driver knee bolster reinforcement. Refer to Driver Knee Bolster Reinforcement Replacement (Equinox) or Driver Knee Bolster Reinforcement Replacement (Terrain)
1	Body Control Module Procedure Disconnect the electrical connectors. Depress the tab on the bracket and slide the module forward. Reprogram the module if replaced. Refer to Control Module References .

Callout

Component Name

Preliminary Procedure

Remove the drivers side insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side (Equinox) or Instrument Panel Insulator Panel Replacement - Left Side (Terrain)
Remove the driver knee bolster reinforcement. Refer to Driver Knee Bolster Reinforcement Replacement (Equinox) or Driver Knee Bolster Reinforcement Replacement (Terrain)

Body Control Module

Procedure

Disconnect the electrical connectors.
Depress the tab on the bracket and slide the module forward.
Reprogram the module if replaced. Refer to Control Module References .