LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2014 >> Terrain SLE, 4D Utility >> Repair and Diagnosis >> External Pages >> Different car >> Section 49 (Antilock Brake System With Traction Control System & Stability Control System) >> Repair Instructions >> Electronic Brake Control Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2010 GMC Terrain and 2010 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: EBCM
    GM1873923Courtesy of GENERAL MOTORS CORP.
  1. Install the EBCM seals, if removed.
  2. Install the EBCM (1) to the BPMV.
    3. Fig 2: EBCM Bolts
    GM1873922Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Fastener Caution .
  3. Install the 4 EBCM bolts (1) and tighten the bolts in a cross pattern to 3 N.m (27 lb in).
  4. Install the accessory wiring junction block. Refer to Accessory Wiring Junction Block Replacement .
  5. If installing a new EBCM, program the EBCM. Refer to Control Module References .
  6. Without starting the engine, place the ignition switch in the ON position.
  7. Perform the Diagnostic System Check - Vehicle .
scientia non olet · About LEMON Manuals