LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2014 >> Terrain SLE, 4D Utility >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (Vehicle Diagnostic Information - Scan Tool Information) >> Specifications >> Multimedia Player Interface Module Scan Tool Information
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Multimedia Player Interface Module Scan Tool Information

WARNING: This page is about a different car, the 2010 GMC Terrain and 2010 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
Multimedia Player Interface Module Scan Tool Data Parameters

Parameter Expected Value Definition
Operating Conditions:  Ignition ON/Engine OFF/Radio ON
GM Part Number Varies The scan tool displays the part number.
Calibration Part Number 1 Varies The scan tool displays the primary software part number.
Calibration Part Number 2 Varies The scan tool displays the primary calibration part number
Battery Voltage Varies The scan tool displays volts. This is the voltage input supplied to the Multimedia Player Interface Module.
USB Device Detection Inactive The scan tool displays Active or Inactive. Being active indicates a USB device is connected.
Aux IN Detection Inactive The scan tool displays Active or Inactive.
Sensing & Status. This parameter displays active when a device present on AUX In (ministereo plug).
USB Overcurrent Protection Inactive The scan tool displays Active or Inactive. USB over current detection indicates a USB device is drawing too much current and the USB functionality of the device is turned OFF.
Bluetooth Device Detection Inactive The scan tool displays Active or Inactive. Active indicates a Bluetooth device connected.
Mute Status Mute OFF The scan tool displays Mute OFF or Mute ON. This parameter displays the status of the mute.
Audio Source Status Internal The scan tool displays Internal Source, AUX or Bluetooth.This parameter displays the source of the audio.
USB Power Status OFF The scan tool displays OFF or ON. This is the status of the USB power.
Connected Device Type 1 None The scan tool displays None, USB Mass Storage Device, USB Media Transfer Protocol Device, Media Player - iPod, Bluetooth, AUX, Media Player - Zune, or Device Inserted But Not Supported. This parameter displays the type of auxiliary input source connected.
Connected Device Type 2 None The scan tool displays None, USB Mass Storage Device, USB Media Transfer Protocol Device, Media Player - iPod, Bluetooth, AUX, Media Player - Zune, or Device Inserted But Not Supported. This parameter displays the type of auxiliary input source connected.
Connected Device Type 3 None The scan tool displays None, USB Mass Storage Device, USB Media Transfer Protocol Device, Media Player - iPod, Bluetooth, AUX, Media Player - Zune, or Device Inserted But Not Supported. This parameter displays the type of auxiliary input source connected.
Connected Device Type 4 None The scan tool displays None, USB Mass Storage Device, USB Media Transfer Protocol Device, Media Player - iPod, Bluetooth, AUX, Media Player - Zune, or Device Inserted But Not Supported. This parameter displays the type of auxiliary input source connected.
Bluetooth Signal Strength DB The scan tool displays the signal strength of the Bluetooth connection.
scientia non olet · About LEMON Manuals