LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2014 >> Terrain SLT, 4D Utility >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Programming And Setup - All Systems) >> Repair Instructions >> Inflatable Restraint Sensing and Diagnostic Module Programming and Setup >> Sensing and Diagnostic Module Setup
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Sensing and Diagnostic Module Setup

WARNING: This page is about a different car, the 2010 GMC Terrain and 2010 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.

The replacement of some components will require a setup procedure for complete repair. The SDM Setup Procedure must be performed if any of the following components are replaced:

  1. SDM
  2. BCM
  1. Connect a scan tool to the vehicle and access SPS. Refer to Service Programming System (SPS) 
  2. Perform the SPS function Inflatable Restraint Sensing and Diagnostic Module - Setup and follow the on-screen instructions.
  3. Clear any DTCs after completing the Setup procedure.
scientia non olet · About LEMON Manuals