Removal Procedure
WARNING: This page is about a different car, the 2010 GMC Terrain and 2010 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Refer to Brake Dust Warning
.
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
- Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
- Disconnect the wheel speed sensor electrical connector.
- Remove the front brake hose bracket nut (1).
- Release the front wheel speed sensor harness from the retainers on the front brake hose.
- Remove the wheel speed sensor bolt (1).
- Remove the wheel speed sensor (1) by pulling the sensor straight upward from the steering knuckle.