LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2016 >> Canyon SL >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Programming And Setup - All Systems) >> Repair Instructions >> Transfer Case Control Module Programming and Setup >> Programming an Existing or New Control Module
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Programming an Existing or New Control Module

WARNING: This page is about a different car, the 2017 GMC Canyon and 2017 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.

To program an existing or new control module, perform the following procedure:

  1. Install the special tool: EL-49642 SPS Programming Support Tool
  2. Ignition On/Vehicle In Service Mode
  3. Access SPS and follow the on-screen instructions for the control module: K69 Transfer Case Control Module
  4. Perform the SPS function: K69 Transfer Case Control Module - Programming
  5. Perform the SPS function: K69 Transfer Case Control Module - Setup
  6. Clear DTCs after programming is complete. Clearing powertrain DTCs will set the Inspection/Maintenance (I/M) system status indicators to No.
scientia non olet · About LEMON Manuals