Circuit/System Verification
WARNING: This page is about a different car, the 2017 GMC Canyon and 2017 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON.
- Verify DTC C056D is not set.
- If DTC C056D is set NOTE:
Check power and ground on the engine wiring harness for faulty connections or corrosion before replacing the K43 Power Steering Control Module.
Replace the K43 Power Steering Control Module.
- If DTC C056D is not set
- If DTC C056D is set
- All OK