Component Test

Switch Static Test

1. Ignition OFF, disconnect the harness connector at the S70L Steering Wheel Controls Switch - Left.
2. Test for infinite resistance between the control circuit terminal 2 and ground circuit terminal 7.
   • If less than infinite resistance 

     Replace the S70L Steering Wheel Controls Switch - Left.

   • If infinite resistance 
3. Test for 1.0k - 1.5k Ω between the control circuit terminal 2 and ground circuit terminal 7 while pressing forward collision alert switch.
   • If not between 1.0k - 1.5k Ω 

     Replace the S70L Steering Wheel Controls Switch - Left.

   • If between 1.0k - 1.5k Ω 
4. Test for 3.8k - 5.8k Ω between the control circuit terminal 2 and ground circuit terminal 7 while pressing lane departure warning switch.
   • If not between 3.8k - 5.8k Ω 

     Replace the S70L Steering Wheel Controls Switch - Left.

   • If between 3.8k - 5.8k Ω 
5. All OK.