LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2016 >> Yukon Denali, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 91 (Object Detection System And Pedestrian Protection System) >> Diagnostic Information and Procedures >> DTC B395C: Sideview Camera >> Circuit/System Verification
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Verification

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2015 GMC Yukon XL, 2015 GMC Yukon, 2015 Chevrolet Tahoe, 2015 Chevrolet Suburban, and 2015 Cadillac Escalade ESV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON.
  2. Verify DTC B395C 4B is not set.
    • If the DTC is set 
    1. Program the K157 Video Processing Control Module.
    2. Verify DTC B395C 4B is not set after programming.
      • If the DTC sets after programming, replace the B225R Sideview Camera - Right.
      • If the DTC does not set
    3. All OK.
    • If the DTC is not set 
  3. Verify DTC B395C 66 is not set.
    • If the DTC is set 

      Remove the B225R Sideview Camera - Right and reinstall

    • If the DTC is not set 
  4. Verify DTC B395C 08 is not set.
    • If DTC is set 

      Refer to Circuit/System Testing

    • If DTC is not set 
  5. All OK.
scientia non olet · About LEMON Manuals