Fastener Specifications
WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Brake Pipe Fitting | 18 N.m (13 lb ft) |
| Brake Pressure Modulator Valve (BPMV) Bracket Nut | 7 N.m (62 lb in) |
| Brake Pressure Modulator Valve (BPMV) Primary Brake Pipe Fitting | 32 N.m (24 lb ft) |
| Brake Pressure Modulator Valve (BPMV) Secondary Brake Pipe Fitting | 32 N.m (24 lb ft) |
| Electronic Brake Control Module (EBCM) Bolt | 6 N.m (53 lb in) |
| Electronic Brake Control Module (EBCM) Bracket Bolt | 8 N.m (71 lb in) |
| Front Floor Console Trim Plate Bolt | 0.75 N.m (7 lb in) |
| Vehicle Yaw Sensor Nut | 9 N.m (80 lb in) |
| Wheel Speed Sensor Bolt | 10 N.m (89 lb in) |