Fastener Specifications
WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
Single Use Non-Threaded Fasteners/Component
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Differential Drive Pinion Gear Seal |
| Front Wheel Drive Intermediate Shaft Retaining Ring |
| Front Wheel Drive Intermediate Shaft Seal |
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Pinion Nut | Differential Drive Pinion Gear Seal Replacement |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Front Differential Carrier Cover Bolt | 54 N.m (40 lb ft) |
| Front Differential Carrier Mounting Bolts - Front | |
|
30 N.m (22 lb ft) |
|
180 degrees |
| Front Differential Carrier Mounting Bolts - Rear | |
|
30 N.m (22 lb ft) |
|
90 degrees |
| Drain Plug | 33 N.m (24 lb ft) |
| Fill Plug | 33 N.m (24 lb ft) |
| Intermediate Shaft Housing Bolts | 58 N.m (43 lb ft) |