Removal Procedure
WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Refer to Brake Fluid Irritant Warning .
CAUTION:
Refer to Brake Fluid Effects on Paint and Electrical Components Caution .
- Turn the ignition OFF.
- Remove the windshield washer solvent container filler tube (1). Refer to Windshield Washer Solvent Container Filler Tube Replacement (Sedan with CE1)Windshield Washer Solvent Container Filler Tube Replacement (Sedan with CE4)Windshield Washer Solvent Container Filler Tube Replacement (Coupe) .
- Thoroughly clean the electronic brake control module (EBCM) to brake pressure modulator valve (BPMV) area of any accumulated dirt and debris.
- Disconnect the EBCM electrical connector.
- Remove the EBCM bolts (1).
- Remove the EBCM (1) from the BPMV.
- Clean the sealing surfaces of the EBCM and the BPMV with denatured alcohol and allow to dry.
NOTE:
Do not pry the components apart.