Installation Procedure
Courtesy of GENERAL MOTORS COMPANY
- Partially install the secondary fuel pump module and connect the crossover tube (1) by sliding into position.
Courtesy of GENERAL MOTORS COMPANY
- Install a NEW O-ring (2) and the secondary fuel tank module (1).
Courtesy of GENERAL MOTORS COMPANY
- Using the CH-48482
wrench, install the cam lock ring (1) by turning clockwise.
Courtesy of GENERAL MOTORS COMPANY
- Connect the electrical connector (1).
- Connect the evaporative emission line (2). Refer to Plastic Collar Quick Connect Fitting Service
.
- Install the fuel tank. Refer to Fuel Tank Replacement (AWD)Fuel Tank Replacement (FWD)
.