Removal Procedure
- Remove the fuel tank. Refer to Fuel Tank Replacement (AWD) Fuel Tank Replacement (FWD) .
- Disconnect the crossover tube from the secondary fuel pump module. Refer to Fuel Tank Fuel Pump Module Replacement - Secondary (With Out) .
- Disconnect the electrical connectors (1).
- Disconnect the fuel and evaporative emission lines (2). Refer to Plastic Collar Quick Connect Fitting Service .
- Using the J-45722 wrench, remove the cam lock ring (1) by turning counterclockwise.
- Remove the primary fuel tank module (1) and the O-ring (2).
- If replacing the fuel pump module only, remove the primary fuel level sensor. Refer to Fuel Tank Fuel Pump Module Fuel Level Sensor Replacement .
WARNING:
Refer to Gasoline/Gasoline Vapors Warning .