LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2018 >> Acadia SL >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Programming And Setup - All Systems) >> Repair Instructions >> Electronic Suspension Control Module Programming and Setup >> Replace and Program Control Module or Reprogram Control Module
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Replace and Program Control Module or Reprogram Control Module

WARNING: This page is about a different car, the 2016 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install EL-49642  SPS Programming Support Tool.
  2. Access the Service Programming System (SPS) and follow the on-screen instructions.
  3. On the SPS Supported Controllers screen, select Suspension Control Module - Programming and follow the on-screen instructions.
  4. At the end of programming, choose the "Clear All DTCs" function on the SPS screen.
  5. With a scan tool, perform the suspension system calibration procedure, if applicable.
scientia non olet · About LEMON Manuals