Circuit/System Verification
- Ignition - On/Vehicle - In Service Mode
- Verify DTC B094B 45/B094C 45 is not set.
- If the DTC is set
- Program the control module: B218 Side Object Sensor Module
- Verify the DTC does not set.
- If the DTC is set
Replace the appropriate component: B218 Side Object Sensor Module
- If the DTC is not set
- If the DTC is set
- All OK.
- Go to next step: If the DTC is set
- Verify DTC B094B 00, B094C 00, B094B 08, B094C 08, B094B 54, B094C 54 is not set.
- If the DTC is set
Replace the appropriate component: B218 Side Object Sensor Module
- Go to next step: If the DTC is not set
- If the DTC is set
- Verify DTC B094B 58/B094C 58 is not set.
- If the DTC is set
Verify the following conditions do not exist:
- Visible Damage
- Dirty
- If a condition exists - Repair or replace as necessary
- If no conditions exist - Replace the appropriate component: B218 Side Object Sensor Module
- Go to next step: If the DTC is not set
- If the DTC is set
- All OK.