LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2018 >> Terrain SL >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Repair Instructions >> Electronic Brake Control Module Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING:

Refer to Brake Fluid Irritant Warning .

CAUTION:

Refer to Brake Fluid Effects on Paint and Electrical Components Caution .

CAUTION:

Always connect or disconnect the wiring harness connector from the EBCM/EBTCM with the ignition switch in the OFF position. Failure to observe this precaution could result in damage to the EBCM/EBTCM.

  1. Place the ignition switch in the OFF position.
    2. Fig 1: EBCM/BPMV and Bracket Assembly
    GM3876206Courtesy of GENERAL MOTORS COMPANY
  2. Remove Electronic Brake Control Module with Brake Pressure Modulator Valve (1) - Electronic Brake Control Module with Brake Pressure Modulator Valve Replacement 
    3. Fig 2: EBCM Bolts
    GM3876207Courtesy of GENERAL MOTORS COMPANY
  3. Remove Electronic Brake Control Module Bolt (1) - [3x]
    4. Fig 3: EBCM
    GM3876208Courtesy of GENERAL MOTORS COMPANY
  4. Remove Electronic Brake Control Module (1)
scientia non olet · About LEMON Manuals