Installation Procedure
- Install Rear Wheel Speed Sensor.
- Install Rear Wheel Speed Sensor Bolt (1) and tighten 6 N.m (53 lb in)
- Secure Rear Wheel Speed Sensor Harness Retainer (1).
- Secure Rear Wheel Speed Sensor Harness Retainer (1) - [3x]
- Connect Rear Wheel Speed Sensor Electrical Connector (1)
- Install the tire and wheel assembly. Tire and Wheel Removal and Installation
- Perform the diagnostic system check. Diagnostic System Check - Vehicle
CAUTION:
Refer to Fastener Caution .