Fastener Specifications
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Front Cradle Brace Bolt | |
|
58 N.m (43 lb ft) |
|
30 - 45 Degrees |
| Rear Suspension Cradle Mounting Bolt - Large Bolt | |
|
90N.m(66 lb ft) |
|
90 - 105 Degrees |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Drivetrain and Front Suspension Cradle Mounting Bolt | 175 N.m (129 lb ft) |
| Front Tire Front Air Deflector Bolt | 2.5N.m (22 lb in) |
| Front Wheelhouse Liner Bolt | 2.5N.m (22 lb in) |
| Rear Suspension Cradle Bolts - Small | 100 N.m (74 lb ft) |
| Rear Tire Front Air Deflector Bolt | 2.5N.m (22 lb in) |
| Trailer Hitch Bolt | 100 N.m (74 lb ft) |
| Trailer Hitch Nuts | 58 N.m (43 lb ft) |
| Rear Wheelhouse Liner Bolt | 2.5N.m (22 lb in) |
| Front Compartment Air Deflector Bolt | 2.5N.m (22 lb in) |
| Underbody Rear Air Deflector Nut | 3N.m(27 lb in) |
| Underbody Rear Air Deflector Bolt | 5 N.m (44 lb in) |