Removal Procedure

WARNING: This page is about a different car, the 2021 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

NOTE:
Use a small flat-bladed tool to disengage integral tabs on cargo tie down loop bolt cap.

Cargo Tie Down Loop Bolt Cap (1) - Remove [2x]
Cargo Tie Down Loop Bolt (2) - Remove [2x]
Cargo Tie Down Loop (3) - Remove [2x]
Courtesy of GENERAL MOTORS COMPANY

Rear Compartment Floor Panel Trim (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Use a small flat-bladed tool to disengage integral tabs on rear end trim finish panel opening cover (1).
Rear End Trim Finish Panel Opening Cover (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

With a flat bladed plastic trim tool, disengage the integral clips.
Rear End Trim Finish Panel (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Use a flat-bladed plastic tool to remove the push-in retainers.

Rear Compartment Floor Stowage Compartment Retainer (1) - Remove [3x]
Rear Compartment Floor Panel Trim (2) - Remove
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Carefully manipulate the deck lid hinge opening of the rear compartment side trim past the hinge cover.

Rear Compartment Side Trim Insulator Retainer (1) - Remove [4x]
Rear Compartment Side Trim-Right Side (2) - Remove
Courtesy of GENERAL MOTORS COMPANY

Vehicle Performance Data Recorder Bracket Nut (1) - Remove [2x]
Vehicle Performance Data Recorder Bracket Bolt (2) - Remove
Vehicle Performance Data Recorder Bracket (3) - Remove
Disconnect the electrical connectors.
Courtesy of GENERAL MOTORS COMPANY

Video Processing Module Bracket Bolt (1) - Remove [3x]
Video Processing Module Bracket (2) - Remove
Disconnect the electrical connectors.
Courtesy of GENERAL MOTORS COMPANY

Video Processing Module Nut (1) - Remove [2x]
Video Processing Module (2) - Remove