Removal Procedure
WARNING: This page is about a different car, the 2021 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
- NOTE:
Use a small flat-bladed tool to disengage integral tabs on cargo tie down loop bolt cap
Cargo Tie Down Loop Bolt Cap (1) - Remove [2x]
- Cargo Tie Down Loop Bolt (2) - Remove [2x]
- Cargo Tie Down Loop (3) - Remove [2x]
Rear Compartment Floor Panel Trim (1) - Remove
Use a small flat-bladed tool to disengage integral tabs on rear end trim finish panel opening cover (1).
- Rear End Trim Finish Panel Opening Cover (1) - Remove
With a flat bladed plastic trim tool, disengage the integral clips.
- Rear End Trim Finish Panel (1) - Remove
- NOTE:
Use a flat-bladed plastic tool to remove the push-in retainers.
Rear Compartment Floor Stowage Compartment Retainer (1) - Remove [3x]
- Rear Compartment Floor Panel Trim (2) - Remove
- NOTE:
Carefully manipulate the deck lid hinge opening of the rear compartment side trim past the hinge cover.
Rear Compartment Side Trim Insulator Retainer (1) - Remove [4x]
- Rear Compartment Side Trim - Right Side (2) - Remove
Disconnect the electrical connectors.
- Release the retaining tab.
- Automated Driving Mapping Module (1) - Remove