Installation Procedure
WARNING: This page is about a different car, the 2021 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
Ensure the retaining tabs are properly aligned.
- Image Processing Module (1) - Install
Connect the electrical connectors.
- Secure the retaining tab.
Rear Window Panel Trim (2) Install
- With the aid of an assistant, guide the rear window panel trim (1) rearward in the vehicle and downward to clear the speaker system.
- Ensure the rear window trim panel feet are seated into the rear window sheet metal drain shoe.
- Rear Window Panel Trim Retainer (1) - Install [3x]
Connect the electrical connector.
- Quarter Upper Trim Panel (3) - Install [2x]
- Quarter Window Trim Finish Panel Bolt (2) Install and tighten [2x] - Fastener Specifications
- Quarter Window Trim Finish Panel Bolt Cap - Install [2x]
- Enable the SIR System. SIR Disabling and Enabling .
- Perform the necessary programming and setup procedure: Control Module References
CAUTION:
Refer to Fastener Caution .