Fastener Specifications
WARNING: This page is about a different car, the 2018 GMC Terrain and 2018 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Catalytic Converter Gasket |
| Exhaust Gasket |
| Exhaust Manifold Gasket |
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Catalytic Converter Clamp (LH7) | 6 N.m (53 lb in) |
| Exhaust Manifold Bolt (LTG) | 20 N.m (15 lb ft) |
| Exhaust Manifold Bolt (LH7) | |
| First Pass: | 20 N.m (15 lb ft) |
| Second Pass: | 20 N.m (15 lb ft) |
| Final Pass: | 20 N.m (15 lb ft) |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Catalytic Converter Brace Bracket Bolt (LTG, LYX) | 22 N.m (16 lb ft) |
| Catalytic Converter Brace Bracket Nut (LYX) | 22 N.m (16 lb ft) |
| Catalytic Converter Brace Bracket Nut (LH7) | 22 N.m (16 lb ft) |
| Catalytic Converter Brace Bracket Nut @ Transmission Housing Stud (LYX) | 58 N.m (43 lb ft) |
| Catalytic Converter Brace Nut {LH7) | 22 N.m (16 lb ft) |
| Catalytic Converter Clamp (LH7) | 25 N.m (18 lb ft) |
| Catalytic Converter Clamp Bolt (LYX) | 15 N.m (11 lb ft) |
| Catalytic Converter Heat Shield Bolt (LTG) | 10 N.m (89 lb in) |
| Catalytic Converter Heat Shield Bolt (LH7) | 10 N.m (89 lb in) |
| Catalytic Converter Nut (LTG, LYX) | 22 N.m (16 lb ft) |
| Catalytic Converter Nut @Turbocharger (LTG) | 50 N.m (37 lb ft) |
| Catalytic Converter Stud (LH7) | 9 N.m (80 lb in) |
| Exhaust Front Pipe Bracket Bolt (LTG) | 22 N.m (16 lb ft) |
| Exhaust Front Pipe Hanger Bracket Bolt (LTG) | 22 N.m (16 lb ft) |
| Exhaust Front Pipe Nut (LH7) | 22 N.m (16 lb ft) |
| Exhaust Front Pipe Nut (LTG, LYX) | 22 N.m (16 lb ft) |
| Exhaust Front Underbody Heat Shield Retainer | 1.5 N.m (13 lb in) |
| Exhaust Gas Recirculation Pipe Bolt (LH7) | 10 N.m (89 lb in) |
| Exhaust Gas Recirculation Cooler Temperature Sensor- Position 1 (LH7) | 45 N.m (33 lb ft) |
| Exhaust Intermediate Underbody Heat Shield Retainer | 1.5 N.m (13 lb in) |
| Exhaust Manifold Brace Bolt (LTG) | 25 N.m (18 lb ft) |
| Exhaust Manifold Brace Nut (LTG) | 25 N.m (18 lb ft) |
| Exhaust Manifold Heat Shield Fastener (LTG) | 14 N.m (10 lb ft) |
| Exhaust Muffler Heat Shield Retainer | 1.5 N.m (13 lb in) |
| Exhaust Rear Muffler Insulator Bolt (LYX) | 22 N.m (16 lb ft) |
| Exhaust Rear Underbody Heat Shield Retainer (LH7) | 1.5 N.m (13 lb in) |
| Front Cradle Brace Bolt (LTG) | 58 N.m (43 lb ft) |
| Turbocharger Heat Shield Bolt (LH7) | 9 N.m (80 lb in) |
| Turbocharger Heat Shield Nut (LH7) | 9 N.m (80 lb in) |